Connecting Auxiliary Audio Equipment - Sony CDX-M3DI Mode D'emploi

Connecting auxiliary audio
equipment
The unit's AUX IN (external audio input)
terminal on this unit is also used as the BUS
AUDIO IN (audio input) terminal.
You can listen to the sound from your car
speakers by connecting optional Sony portable
devices.
Note
If you connect an optional Sony CD/MD unit, you
cannot connect any portable devices and cannot
select "AUX."
Selecting auxiliary equipment
Press (SOURCE) repeatedly to select
"AUX."
Adjusting the volume level
You can adjust the volume for each connected
audio equipment.
1
Press (MENU).
2
Press < or , repeatedly to select
"SoundTuning."
3
Press (ENTER).
4
Press M or m repeatedly to select
"AUX Level."
5
Press (ENTER).
6
Press < or , repeatedly to adjust
the volume level.
The volume level is adjustable in 1 dB steps
from –6 dB to +6 dB.
7
Press (ENTER).
The display returns to the top menu display.
8
Press (MENU).
The display returns to the normal display.
To deactivate auxiliary equipment in
the music source display
1
Press (OFF).
CD/MD playback or radio reception stops
(the key illumination and display remain on).
2
Press (MENU).
3
Press < or , repeatedly to select
"Setup."
4
Press (ENTER).
5
Press M or m repeatedly to select
"AUX Skip."
6
Press (ENTER).
7
Press m to select "ON."
8
Press (MENU).
To restore the indication, select "AUX Skip
OFF."
29