Bosch Kiox BUI330 Notice D'utilisation D'origine page 12

English – 8
From the initial start page, you can access the status page
via the < (10) button.
Status screen
73%
0 0 .
09:57
73% 98%
N/A
Good connection
Poor connection
No connection
You will also be shown the date of the most recent synchron-
isation between the smartphone and Kiox.
You can access the <Settings> from the bottom section.
<Settings>
You can access the settings menu via the status page.
The <Settings> cannot be accessed or changed while rid-
ing.
You can use the – (11) and + (12) buttons to select the set-
ting you want. You can open the settings, as well as any addi-
tional submenus, using the select button (9). You can use
the < button (10) to go back to the previous menu from any
settings menu.
You can find the following superordinate sections on the first
navigation level:
– <Registration> – Information about registration:
This menu item is only displayed if you have not yet re-
gistered with eBike Connect.
– <My eBike> – Settings for your eBike:
The counters, such as average values or the number of
kilometres travelled that day, can be reset to "0" either
automatically or manually, and so can the range. You can
change the wheel circumference value that was preset by
the manufacturer by ±5 %. If your eBike features eShift,
you can also configure your eShift system here. The bi-
cycle manufacturer or dealer may base the service date
on the distance travelled and/or a period of time. The due
date for the service is displayed under <Next Ser-
vice: ...>. The bike component page displays the serial
number and hardware and software versions for each
component, in addition to other key data which is relev-
ant for the components.
– <Screens> Here you can set the content and order of the
screens, and reset these to factory settings if necessary.
– <Bluetooth> – Switching the Bluetooth® function on or
off: Connected devices, such as the heart rate monitor,
are displayed.
1 270 020 XBK | (29.05.2023)
As well as the status bar, the
status page also shows you
the current time and the state
of charge of all your eBike's
batteries, as well as the state
of charge of your smartphone
battery if the smartphone is
connected via Bluetooth®.
– <My profile> – Active user data
Is only displayed if the user is registered.
– <Sys settings> – A list of setting options for your on-
board computer
You can display the speed and distance in kilometres or
miles, display the clock in 12- or 24-hour format, adjust
the time, date and time zone and select your preferred
language. You can reset the Kiox to its factory settings,
run a software update (if available) and choose between a
black or white design.
– <Information> – Information about your Kiox
Information on FAQs (frequently asked questions), certi-
fication, contact information, information on licences
You can find a detailed description of each parameter in the
online operating instructions at
www.Bosch-eBike.com/Kiox-manual.
Quick Menu
Selected settings are displayed on the Quick Menu. These
settings can be changed even while riding.
You can access the Quick Menu via the select button (9). It
cannot be accessed from the Status screen.
The following settings can be changed via the Quick Menu:
– <Reset trip data?>
All data on the journey so far is reset to zero.
– <eShift> (optional)
You can set the cadence here.
– <eSuspension> (optional)
This is where you can set a manufacturer-defined shock
absorption or suspension mode.
Bosch eBike Systems