Bosch Kiox BUI330 Notice D'utilisation D'origine page 11

Displays and settings of the on-
board computer
Note: All screenshots showing the display and text on the
following pages are from the approved software version. The
display and/or text may change slightly following a software
update.
Operating logic
You can use the < (10) and > (8) buttons to switch between
the different riding value information pages (even while rid-
ing). This way, you can keep both hands on the handlebars
while cycling.
You can use the + (12) and – (11) buttons to increase or de-
crease the assistance level.
The <Settings> that can be accessed via the Status screen
cannot be changed while riding.
You can use the select button (9) to perform the following
functions:
– You can access the quick menu while riding.
– You can access the settings menu from the Status screen
while stationary.
– You can confirm values and acknowledge informative
hints.
– You can exit a dialogue.
If the on-board computer is removed from its holder and not
switched off, it will display information regarding the last
journey, as well as status information. Press the (3) bike
lights button to switch to the next screen.
If no button is pressed after the on-board computer is re-
moved from the holder, it will switch itself off after one
minute.
Order of pages
Provided the on-board computer is fitted to the holder, you
can view the following displays one after the other:
1. Start page
2. Time and range
3. Distance and journey time
4. My power, cadence and heart rate
5. Average and maximum speed
6. Distance, range, my power and heart rate
7. Climb, calories and total distance
8. Information screen for navigation:
<Plan a route in the eBike Connect Smartphone app>
9. Status page
Start page
When you insert the on-board computer into the holder
while it is switched on for the first time, it will display the fol-
lowing start page. The on-board computer will then remem-
ber the last page shown and display it when switching on the
on-board computer.
Bosch eBike Systems
b
12:58
a
l
k
j
24
i
h
g
a Time/speed indicator
b Assistance level indicator
c Lighting indicator
d Charge indicator of the eBike battery
e Unit of speed indicator
f Speed
g Connection status
h Navigation bar
i Drive power
j Your performance
k Average speed
l Performance evaluation
a) Can be changed between km/h and mph via the <Settings>/
<Sys settings> status page
The a ... d indicators form the statusbar and are shown on
every page. If the speed is already being displayed on the
screen itself, the a indicator will change to the current time
in hours and minutes. The statusbar displays:
– Speed/time: The current speed in km/h or mph or the
current time
– Assistance level: Indicates the current level of assistance
using a colour code
– Light: A symbol that indicates whether the light is on
– eBike battery state of charge: Indicates the current
state of charge as a percentage
The performance evaluation l graphically displays your cur-
rent speed in comparison to your average speed k.
– Pointer in the orange area (left-hand side): Below the av-
erage speed
– Pointer in the green area (right-hand side): Above the av-
erage speed
– Pointer in the centre: Corresponds to the average speed
The navigation bar h indicates which page you are on. Your
current page is highlighted. You can use the < (10) and
> (8) buttons to move to additional pages.
English – 7
c
31%
d
e
,5
f
a)
1 270 020 XBK | (29.05.2023)