EGO HTX5300-PA Guide D'utilisation page 33

Battery High-temperature Protection
If the battery temperature exceeds 158°F (70°C) during operation, the temperature-
protection circuit will immediately shut off the machine to protect the battery pack from
overheating damage. The battery-status indicator will glow solid orange. Release the
trigger and wait until the overheated battery cools down and the indicator turns green,
then restart the machine.
Battery Electronics Error Protection
When the battery pack electronics error occurs, the battery-status indictor will flash
red/green alternately and the machine will shut off in 3 seconds. Replace the battery
pack or contact EGO customer service center.
Machine Overload Protection
This machine features a built-in overload circuit protection. When the machine is
overloaded, the motor will stop and the speed indicator will flash orange. Remove the
battery pack from the machine, then reattach the battery pack and restart the machine.
Decrease the load on the machine, avoid cutting too much at a time or oversize cutting
thickness or cutting on the heavy/woody shrubs.
Machine High-temperature Protection
If the machine temperature exceeds 194 °F (90 °C) during operation, the temperature-
protection circuit will immediately shut off the machine to prevent overheating damage.
The speed indicator will glow solid orange. Release the trigger and wait until the
overheated machine cools down and the speed indicator turns green, then restart the
machine.
BLUETOOTH WIRELESS TECHNOLOGY
®
Products with built-in Bluetooth wireless technology can connect to mobile devices.
®
Please visit www.egopowerplus.com/commercial for instructions on how to use the
Bluetooth function.
®
The Bluetooth symbol will light up when the machine is connected to your mobile
®
device.
33
56-VOLT LITHIUM-ION COMMERCIAL 21" ARTICULATING POLE HEDGE TRIMMER — HTX5300-PA/HTX5300-PA-FC