Costway TQ10124US Mode D'emploi page 8

Assembly
WARNING
Children can be harmed by small parts, sharp edges and sharp
points in the vehicles unassembled state, or by electrical items.
Care should be taken in unpacking and assembling the vehicle.
Children should not handle parts, including the battery, or help in
the assembly of the vehicle.
Screw x27
1
(Φ4 x 12mm)
Insert the rear bumper support frame
under the main body. Fasten it with 11
screws.
3
1 2
Front Wheel Assembly
Assemble all the parts in sequence as
picture shown. Insert a pin to the hole of
the front axle and make it to "M" shape by
a plier. "Snap" a hubcap into the center.
14
Repeat the process for the other side.
2
Insert the side support (left) under the
main body as picture show above , and
fasten it with 7 screws. (The same steps
for the right)
4
3
1 2
Rear Wheel Assembly
Assemble all the parts in sequence as
picture shown. Insert a pin to the hole of
the front axle and make it to "M" shape
by a plier. "Snap" a hubcap into the
center. Repeat the process for the other
side.
Assembly
5
"Snap" the wheel cover into the right
place, Repeat the process for the other
three wheels.
7
3
Insert the windshield to the slots on the
main body and fasten with 2 screws.
6
Plug connectors. Place the steering
wheel onto the turning shaft, press it to
the right place.
8
Battery Assembly
Plug connect as the picture shows.
15