Costway TQ10124US Mode D'emploi page 11

Problem Possible Cause
Intermittent Loose wire or
vehicle operation connector
When the go
foot pedal is
Loose wire or
pressed, the
connector
vehicle won't run
without a push
This is normal
Charger get
and should not
warm during use
be a concern
Some noise and
Battery makes
swelling is
gurgling or
normal and
sizzling noise
should not be a
while charging
concern
Parts Diagram
21
24
Note: Some parts shown are assembled to both sides of the vehicle.
20
Solution
Check all wires around the motors and all
connectors to make sure they are tight.
Check all wires around the motors and all
connectors to make sure they are tight.
No action required.
No action required. If the battery does not
make noise while charging. It does not
mean it isn't accepting the charging.
---13
1. Front Bumper
2. Front Support Frame
3. Front Axel Assembly
4. Front Wheel (size no.:12 hole)
5. Wheel Cover
6. Rear Axel(Diameter:15mm)
7. Side Support Frame
8. Drive Motors
9. Rear Wheel (size no., 15 hole)
10. Door
11. Rear Bumper Support Frame
12. Rear Bumper
13. Rear Door
14. Rear light
15. Rear Window
16. Seat
17.Battery Box
18.Steering Wheel
19.Side Mirror
20.Dashboard
10
21.Windshield
22.Main Body
24.Hood
No. Part Quantity
x1
x1
x1
x2
x4
x1
x2
x2
x2
x2
x1
x1
x1
x2
x1
x1
x1
x1
x2
x1
x1
x1
x1
21