Publicité
Les langues disponibles
Les langues disponibles
Connect the toilet to the ventilation pipe and
urine tube
Toilet mounting
IMPORTANT! Connect the power cord to the toilet before mounting it. After mounting, you will not have ac-
cess to the back of the toilet where the cable is to be connected.
Tiny is designed to be fixed to the floor or to the wall. For maximum stability, both options can be combined.
Floor
To attach the toilet to the floor, use the supp-
lied screw or other screw suitable for the
purpose. There are two intended screw holes
in the bottom of the toilet, the plastic in the
middle of the hole is removed with a suitable
tool.
Wall
Use the following holes to mount the toilet to
the wall.
14
Install the fixed fan filter
The toilet is continuously ventilated to ensure an odor-free bathroom as well as drying out waste. To protect
the fan from dirt and dust resulting from use, there is a filter in the air duct. This filter is not pre-installed
but must be installed on site as shown below. The filter should be cleaned regularly to maintain its proper
functioning.
To install the yellow fan filter in the toilet, follow the steps below:
1.
2.
Place basket in the urine drain
Place the supplied basket in the urine drain. The net ensures that no large ob-
jects enter the urine outlet. The basket is designed to perfectly fit a Separett Bio
Drain Cleaner.
1.
3.
2.
15
Publicité
