Separett Tiny 1271 Manuel D'installation page 7

The assembled parts are then mounted as pipe ends in the same way as shown in previous sections. It is
also possible to use the ventilation cowl at a horizontal pipe end in more demanding conditions to ensure
better protection against weather and wind.
Power supply for toilet
If the toilet is to be mounted against a wall, a power cord must be connected to the toilet before it is moun-
ted. After wall mounting, the connection is not accessible.
The toilet must be connected to a power source. The toilet comes with a power adapter for 110–240 V and
a 12 V battery cable. Regardless of the power source, the chord must be connected to the back of the toilet,
at the marked input in the picture above. Make sure that the plug is properly connected.
Verify that the toilet is receiving power
by checking that air is exiting the venti-
lation outlet.
13