Polaris Victory Motorcycles HAMMER 2005 Mode D'emploi page 128

MAINTENANCE
Battery
Battery Removal
1. Remove the seat (page 122) and left side cover.
2. Remove battery cover retaining nuts, and remove the cover(A).
3. Disconnect the negative ( - ) battery cables (black cables with ends
exposed) first (B).
4. Disconnect the positive ( + ) cables (cable ends are covered with a
red boot) (C).
Caution
Disconnecting the positive cable first can produce an electric shock
that could result in damage or injury.
5. Slide the battery out.
Universal Tool (A)
The universal tool is located in a holder under the left side cover. The universal tool is a combination 6mm
hexagonal wrench with a phillips screwdriver tip, and can be used to service the following items:
Oil Drain Plug
Indicator Bulbs
124
All manuals and user guides at all-guides.com
Air Filter Headlight Bulb
Turn Signal Bulb
B
Misc. Accessory Fasteners
C
A