Polaris Victory Motorcycles HAMMER 2005 Mode D'emploi page 119

Gear Shift Pedal
Adjust Gear Shift Pedal Height
1. Loosen the gear shift linkage rod locknuts.
2. Turn the linkage rod in or out as necessary.
3. Tighten the linkage rod locknuts.
4. Check the gear shift pedal height.
Caution
Do not remove and reposition the shift arm on the shift shaft to adjust gear shift pedal height. A
90_ 5_ angle between the shift arm and the linkage rod must be maintained to ensure correct shift
¦
linkage operation.
All manuals and user guides at all-guides.com
90°
1 2
1. Shift Linkage Rod Lock Nut
MAINTENANCE
1
2. Shift Linkage Rod
115