MAINTENANCE
Clutch
Adjust Clutch Cable Freeplay
1. Remove the right side cover.
2
Hold the cable (1) and loosen the adjuster jam nut (2).
3
Turn the cable adjuster (3) while holding the cable.
4
Turn the cable adjuster in or out until the clutch lever
freeplay is .020- -.040 inch (.5-1.0 mm).
5
Tighten the adjuster jam nut securely while holding
the cable.
6. Reinstall the right side cover.
7. Verify that the safety switch activates so the motorcycle
cannot be started in gear with the clutch lever released.
NOTE: The starter interlock switch is dependent on the clutch
lever freeplay being set correctly to ensure activation of the clutch
safety switch.
106
All manuals and user guides at all-guides.com
1
2
3
020--.040 in. (.5-1.0 mm)
.