Numark MP302 Guide D'utilisation Rapide page 6

PLAY, PAUSE & CUE OPERATIONS
PLAY & CUE
Pressing the "PLAY/PAUSE"
button starts the disc. Pressing
the "CUE" button will reset the
disc to the last place where the
disc was started. This is called
the cue point. By alternately
pressing the "PLAY/PAUSE"
button and the "CUE" button,
the disc may be returned and
played from the cue point any
number of times. This function
is called back cue.
PLAY, PAUSE & CUE
When play has been paused
and then started again, the
return position for the back
cue will be updated to this
new position.
EDITING CUE POINT
When the inner dial is turned
while a cue point is set, a new
cue point can be located. The
CD player will repeatedly play
small parts of the CD as you
move it to the desired position.
By pressing "PLAY/PAUSE"
then "CUE" you can confirm
that the new cue point is
desirable.
MATCHING BPMs
Match the tempo by monitoring the music of both PLAYER 1 and PLAYER 2 by ear and adjusting the pitch. When the tempo of
the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the ( + ) side and
match the tempo. When faster, move the pitch slider to the ( - ) side. The following illustration shows the case of matching the
pitch of PLAYER 2 to the pitch of the music being played on PLAYER 1.
1. Press PLAY/PAUSE to start PLAYER 1. PLAYER 1 is playing.
2. Press PLAY/PAUSE to start PLAYER 2. Both CD players are playing discs.
3. Listen to PLAYER 2 in your headphones.
headphones) is faster than channel 1, slow down the beat of channel 2 using the
pitch control.
4. If the beat of channel 2 (in the headphones) slower than the beat of channel 1, speed
up the beat using the pitch control.
USING THE BPM DISPLAY FEATURE
Press the BPM button to select the BPM feature on the display on the side of the CD player that
you wish to set. Tap the Counter button to the beat of the music.
You will see the BPM number appear in the display. The more times you tap the more accurate your number will be. When you
adjust the pitch slider the display number will change by an equal percentage.
Press "PLAY/PAUSE"
to start music
Press "PLAY/PAUSE"
to start music
Play Interval
Adjust the "CUE" point
with the jog wheel
Press "PLAY/PAUSE"
to start music
Press "CUE" return to
last starting point
Play Interval
Back Cue Operation
Press "PLAY/PAUSE" Press "PLAY/PAUSE"
to pause music to start music
Play Interval
Back Cue Operation
Press "CUE" return to
last starting point
Play Interval
Back Cue Operation
If the beat of channel 2 (in the
6
Position on Disc
Press "CUE" return to
last starting point
Position on Disc
Position on Disc