Publicité
Les langues disponibles
Les langues disponibles
7 Removing and Fitting the Battery
► Depress the pushbutton (1).
The LEDs (2) at the charger and the LEDs (3) at the
batteries are activated and indicate the status of the
charger and the charging status of the batteries.
6.4
LEDs on charger
The LED indicates the operating status of the charger or any
malfunctions. The LEDs can emit green light or flash red.
If the LED for the respective battery compartment emits
green light, the battery is being charged or waits to be
charged.
► If the LEDs flash red: Remedy the malfunction.
Malfunction in charger or battery.
7 Removing and Fitting the Battery
7.1
Inserting the Battery
► Insert the battery (1) into the battery compartment (2) as
far as it will go.
The battery (1) engages with a click and is now locked.
0458-829-9921-A
1
2
7.2
Removing the Battery
1
► Press both locking levers (1).
The battery (2) is now unlocked and can be removed.
8 Transporting
8.1
Transporting the Charger
► Disconnect the mains plug from the wall socket.
► Wind up the connecting cable and attach it to the charger.
Carrying the charger
► Remove all batteries.
Transporting the charger in a vehicle
► If the charger is transported in a vehicle without being
firmly installed:
► Secure the charger with lashing straps, belts or a net to
prevent it from toppling over and moving.
► Do not stack several chargers.
9 Storing
9.1
Storing the Charger
► Disconnect the mains plug from the wall socket.
English
1
2
25
Publicité
