Technical Data - Metz MECABLITZ 48 AF-1 digital Mode D'emploi

The shots are too bright.
• In close-up shots, overexposure (shots that are too bright) may result if the shut-
ter speed is faster than the flash sync speed. The minimum distance from the
subject should be at least 10% of the maximum flash range indicated on the
display.

16 Technical data

Max. guide numbers at ISO 100/21°, zoom 105 mm:
In the metric system: 48 In the imperial system: 157
Flash modes:
Standard TTL with measuring preflash, TTL–HSS, Manuel, M-HSS
Manual partial light output levels:
1/1 ... P1/128 light output, in one-third increments.
Flash durations see table 2, page 121:
Colour temperature:
approx. 5600 K
Film speed:
ISO 6 to ISO 6400
Synchronisation:
low-voltage ignition
Number of flashes:
• approx. 90 with NiCad batteries (600 mAh)
• approx. 210 with high-capacity alkaline manganese batteries
• approx. 250 with NiMH batteries (1600 mAh)
• approx. 460 with lithium batteries
78
Recycling time (at full light output): Approx. 3,5 sec
Light coverage:
Main reflector from 24 mm (35 mm format)
Main reflector with wide-angle diffuser from 18 mm (35 mm format)
Swivelling ranges and locking positions of the reflector
upwards -7° 45° 60° 75° 90°
counter-clockwise
clockwise 30° 60° 90° 120°
Dimensions, approx., in mm (W x H x D):
71 x 137 x 99
Weight :
approx. 425 gr
Included:
Flash unit with integrated wide-angle diffuser, operating instructions
(at full light output)
30° 60° 90° 120° 150° 180°