Kessel Pumpfix Instructions D'installation, D'utilisation Et D'entretien page 52

6.2.1 Read out data
• Connect USB flash drive
• Select read out data and confirm with OK. A file with the system data is stored on the USB flash drive (*.csv)
6.2.2 Carry out software update
(This is only possible if a respective file (*.bin) is on the USB flash drive)
• Connect the USB flash drive, the data transmission menu appears.
• Select software update
• Enter password and confirm with OK, the update is carried out automatically, simply follow the display
dialogue.
6.2.3 Read in parameters
(This is only possible if a respective file (*.csv) is on the USB flash drive)
• Connect the USB flash drive, the data transmission menu appears.
• Select read in parameters, enter password and confirm with OK, the update is carried out automatically,
simply follow the display dialogue.
6.3 Routing the USB connection out
To make the USB socket on the board accessible without the housing having to be opened, a USB housing
socket with cable and connector for installation in the control unit housing can be ordered from KESSEL (see
1.2.2).
All manuals and user guides at all-guides.com
52 / 168 2019/04