Publicité
Les langues disponibles
Les langues disponibles
The cables of the pumps or the optical probes can be lengthened or shortened. See chapter 6.1 Shortening or
lengthening the motor / sensor cable
•
Connect the plug for the wastewater pump's cable connection to
connection <4>
•
Connect the level sensor's plug (optical probe, to switch on the
wastewater pump on the house side) to connection <1>
•
Connect the plug of the backwater flap's motor drive to the
connection <2>
•
Connect the backwater sensor's plug (optical probe to determine
the alarm level in the direction of the wastewater duct) to the
connection <3>
Assignment of the connecting cable,Fig. [10] (Pumpfix) or Fig. [11]
(Ecolift)
All manuals and user guides at all-guides.com
40 / 168
4
1
2
3
Fig. [9]
2019/04
Publicité
