Kessel Pumpfix Instructions D'installation, D'utilisation Et D'entretien page 50

3 Settings
The following menu appears if the ESC key is pressed in the system info screen or after a connected USB flash drive is detected
USB data transmission
* At the level, the wastewater pump runs as long as the probe sends the signal to pump.
At running time, the pump runs according to the pump's S3 operating mode
All manuals and user guides at all-guides.com
3.1 Parameters
3.2
Date/Time
3.9 Communication
3.10 Language
3.11 Reset
3.13
Activation of pot. free contact
0 Data exchange
2.6.4 12 months
2.6.5 Manual maintenance
3.1.1 SDS Self diagnosis system
3.1.2 On delay flap
3.1.3 Post run time flap
3.1.4
Max. current flap
3.1.5 Switch-on delay pump
3.1.6
Run-on time pump
3.1.7 Max. current pump
3.1.8
Min. current pump
3.1.9 Pump transmitting figure
3.1.10
Running time limit for pump
3.1.16 Operating mode (level or running time)*
3.9.1 Station name
3.9.2
Own number
3.9.3 Modem type
3.9.4 PIN
3.9.6 Text message-Destination 1
3.9.7
Text message-Destination 2
3.9.8 Text message-Destination 3
3.9.9 Status
3.9.10
Interval status SMS
3.10.1 German
3.10.2 English
3.10.3 Français
3.10.4 Italiano
3.10.5 Nederlands
3.10.6 Polski
0.1 Read out data
0.2 Software update
0.3 Read in parameters
50 / 168 2019/04