Publicité
Les langues disponibles
Les langues disponibles
Problems
The batteries are
empty in a short
time
1
The CLIP
function
does not work
The answering ma-
chine no longer
records messages/
memos
No remote access
functions can be
executed
1
CLIP: Calling Line Identification Presentation
In the Case of Problems
Solutions
− Batteries are empty or defective.
− Place the handset in the base station properly. Clean
the contact surfaces on the handset and base station
with a soft, dry cloth.
− Place the handset in the base station for 16 hours.
− The caller number display function is an optional
service offered by telephone network providers. Con-
tact your network provider for further information.
− The caller has suppressed the transmission of their
phone number.
− Ensure that the answering machine is connected
correctly and switched on.
− Check whether the answering machine memory is
full. Delete messages from the memory, if necessary.
. Page 140
− Check that the correct PIN code has been entered
for the remote access. . Page 142
− The telephone used for remote access must be set
to tone dialling.
157
Publicité
