KERN KIB-TM Notice D'utilisation Et D'installation page 80

 Press
, the current setting for the acoustic signal will be
shown.
 Select desired setting (no, ok, ng, s. chap. 8) by
 Confirm input by
 Press
; weighing system is in tolerance weighing mode.
From here evaluation takes place whether the goods to be
weighed are within the two tolerance limits.
Weighing with tolerance range
 Tare when using a weighing container.
 Put on goods to be weighed, tolerance control is started. The signal lights
indicate whether the load is within the two set limits.
Load below specified
tolerance
Indicator will be
displayed
• The tolerance control is not active when the weight is under 20d.
• To delete limits, enter "00.000 kg".
24
.
Load within specified
tolerance
Indicator will be
displayed
.
Load exceeds specified
tolerance
Indicator will be
displayed
KIB-TM-BA_IA-e-1811