Weighing With Tare; Pre-Tare - KERN KIB-TM Notice D'utilisation Et D'installation

7.6 Weighing with tare

 Deposit weighing vessel. After successful standstill control press the
Zero display and indicator
The weight of the container is now internally saved.
 Weigh the material, the net weight will be indicated.
 The weight of the weighing container will be displayed as a minus number after
removing the weighing container.
 The tare procedure can be repeated as many times as necessary, for example
with initial weighing of several components for a mix (add-on weighing). The limit
is reached when the taring range capacity (see type plate)is full.
 To change between gross weight and net weight, press
 To delete the tare value, remove load from weighing plate and press

7.6.1 Pre-Tare

It is possible to enter a pre-tare value beforehand.
 Ensure that there are no objects on the weighing pan.
 Press
and hold until 0.0 is displayed and the left digit is flashing
 Use the arrow keys to enter the pre-tare value and confirm by pressing
The pre-tare value will be shown as a negative value.
KIB-TM-BA_IA-e-1811
appear.
NET
button.
.
.
21