Switch-Over Weighing Unit - KERN KIB-TM Notice D'utilisation Et D'installation

7.5 Switch-over weighing unit

How to enable weighing units:
 Invoke menu item P5 Unt, see chap. 8
 Press
and the first weighing unit with the current setting
will be displayed.
 To enable [on] / disable [off] the displayed weighing unit,
press
 Acknowledge with
will be displayed.
 To enable [on] / disable [off] the displayed weighing unit,
press
 Acknowledge with
 Repeat sequence for each weighing unit.
Note:
„tj" and „Hj" cannot be activated at the same time,
only either ... or ... .
 Press back to weighing mode
Switch-over weighing unit:
 Keep
pressed, the display changes over to the weighing
units activated before (e.g. kg  lb)
20
. The next unit with the current setting
.
several times.


KIB-TM-BA_IA-e-1811