Automatic Adding-Up - KERN KIB-TM Notice D'utilisation Et D'installation

7.9 Automatic adding-up

With this function the individual weighing values are automatically added into the
summation memory when the balance is unloaded without pressing
when an optional printer is connected.
• Menu settings:
„P2 COM  „MODE"  „AUTO"", s. chap. 8
Indicator
Add up:
 Place load A.
After the standstill control sounds a signal tone. The weighing value will be added
to the summation memory and printed.
 Remove the weighed good. More weighed goods can only be added when the
display ≤ zero.
 Place good to be weighed B.
After the standstill control sounds a signal tone. The weighing value will be added
to the summation memory and printed, as required. The number of weighings,
followed by the currently placed weight will be shown in succession.
 Add more weighed goods as described before.
Please note that the weighing system must be unloaded between the individual
weighing procedures.
 This process may be repeated 99 times or till such time as the capacity of the
weighing system has been exhausted.
For how to display and delete weighing data as well as sample logs see chap.
7.8
KIB-TM-BA_IA-e-1811
will be displayed.
and edited,
29