Ec Declaration Of Conformity (Products With Bluetooth ); Ec Declaration Of Conformity (Products Without Bluetooth ) - Husqvarna 535iFR Manuel D'utilisation

Accessory type
Balance XB
EC Declaration of conformity (products with Bluetooth
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declare that the Brush cutters
Husqvarna 535iFR, 535iRXT with serial numbers dating
from 2019 onwards (the year is clearly stated on the
rating plate, followed by the serial number), comply with
the requirements of the COUNCIL'S DIRECTIVE:
• - of May 17, 2006 "relating to machinery"
2006/42/EC.
• - of April 16, 2014 "relating to Radio Equipment"
2014/53/EU.
• - of May 8, 2000 "relating to the noise emissions in
the environment" 2000/14/EC.
• - of June 8, 2011 on the "restriction of use of certain
hazardous substances in electrical and electronic
equipment" 2011/65/EU.
The following standards have been applied:
EN ISO 11806-1:2011, ISO 14982:2009, IEC
62841:1:2014, EN 300328 v2.1.1, EN 62311, ETSI 301
489-1 v.2.1.1, ETSI 301 489-17 v.3.1.1, EN 50581:2012
RISE SMP Svensk Maskinprovning AB, Box 7035,
SE-750 07 Uppsala, Sweden, has carried out a
EC Declaration of conformity (Products without Bluetooth
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declare that the Brush cutters
Husqvarna 535iFR, 535iRX with serial numbers dating
from 2019 onwards (the year is clearly stated on the
rating plate, followed by the serial number), comply with
the requirements of the COUNCIL'S DIRECTIVE:
• - of May 17, 2006 "relating to machinery"
2006/42/EC.
• - of February 26, 2014 "relating to electromagnetic
compatibility" 2014/30/EU.
• - of May 8, 2000 "relating to the noise emissions in
the environment" 2000/14/EC.
• - of June 8, 2011 on the "restriction of use of certain
hazardous substances in electrical and electronic
equipment" 2011/65/EU.
The following standards have been applied:
EN ISO 11806-1:2011, ISO 14982:2009, IEC
62841:1:2014,IEC 61000-6-1:2016, IEC
61000-6-3:2006+AMD1:2010, EN 62311,
EN50581:2012
RISE SMP Svensk Maskinprovning AB, Box 7035,
SE-750 07 Uppsala, Sweden, has carried out a
30
Article number
597 33 12-01
voluntary examination on behalf of Husqvarna AB. The
certificate has the number: SEC/19/2533
RISE SMP Svensk Maskinprovning AB has also verified
agreement with appendix V of the council's directive
2000/14/EC. The certificates have the numbers:
01/1610/008 and 01/1610/009.
For information relating to noise emissions, refer to
Technical data on page 28 .
Huskvarna, 2019-06-28
Pär Martinsson, Development Manager (Authorized
representative for Husqvarna AB and responsible for
technical documentation.)
voluntary examination on behalf of Husqvarna AB. The
certificate has the number: SEC/19/2533
RISE SMP Svensk Maskinprovning AB has also verified
agreement with appendix V of the council's directive
2000/14/EC. The certificates have the numbers:
01/1610/008 and 01/1610/009.
For information relating to noise emissions, refer to
Technical data on page 28 .
Huskvarna, 2019-06-28
Pär Martinsson, Development Manager (Authorized
representative for Husqvarna AB and responsible for
technical documentation.)
®
)
®
)
609 - 003 - 11.12.2019