Ec Declaration Of Conformity; Ec Declaration Of Conformity - For Battery Operated Products - Husqvarna PAX1100 Manuel D'utilisation

EC Declaration of Conformity - for
gasoline operated products
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares that the pole pruner saw,
Husqvarna PAX1100, PAX730, with serial numbers
dating from 2019 onwards (the year is clearly stated on
the rating plate, followed by the serial number), comply
with the requirements of the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of June 8, 2011 "restriction of use of certain
hazardous substances in electrical and electronic
equipment "2011/65/EU
The following standards have been applied for Gasoline
products:
EN ISO 12100:2010, ISO 11680-1:2011, EN
50581:2012
0404, RISE SMP Svensk Maskinprovning AB, Box 7035,
SE-750 07 Uppsala, Sweden, has carried out EC type
examination in accordance with the machinery
directive's (2006/42/EC) article 12, point 3b. The
certificate for EC type examination in accordance with
annex IV, have the number: 0404/18/2492
Huskvarna, 2019-06-24
Per Gustafsson, Development Manager (Authorized
representative for Husqvarna AB and responsible for
technical documentation)
EC Declaration of Conformity - for
battery operated products
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares that the pole pruner saw,
Husqvarna PAX1100, PAX730 attachment with power
unit Husqvarna 325iLK with serial numbers dating from
2019 onwards (the year is clearly stated on the rating
plate, followed by the serial number), comply with the
requirements of the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of June 8, 2011 "restriction of use of certain
hazardous substances in electrical and electronic
equipment " 2011/65/EU
755 - 001 - 17.01.2020

EC Declaration of Conformity

The following standards have been applied for Battery
products:
IEC 62841-1:2014, EN ISO 11680-1:2011, EN
50581:2012
0404, RISE SMP Svensk Maskinprovning AB, Box 7035,
SE-750 07 Uppsala, Sweden, has carried out EC type
examination in accordance with the machinery
directive's (2006/42/EC) article 12, point 3b. The
certificate for EC type examination in accordance with
annex IV, have the number: 0404/18/2492
Huskvarna, 2019-06-24
Per Gustafsson, Development Manager (Authorized
representative for Husqvarna AB and responsible for
technical documentation)
17