Publicité
Les langues disponibles
Les langues disponibles
Basic operations
The lamp display indicates the type of disc (DVD or CD) currently
playing as follows.
With Dolby digital 5.1 ch or DTS digital 5.1 ch surround
With Dolby digital (Lt/Rt *)
With stereo sound (eg Audio CD)
* Lt/Rt refers to the downmix output when connected to a device
that uses Dolby Pro Logic.
Using the Sleep Timer
Using the Sleep Timer, you can fall asleep to music and know the
system will turn off by itself rather than play all night.
From the remote controls:
Primary remote control
SLEEP
Press SLEEP repeatedly.
The shut-off time changes as follows (in minutes):
=10=20=30=60=90=120=150=OFF (Canceled)= (back to
the beginning)
When the shut-off time comes
The system turns off automatically.
To check or change the time remaining until
the shut-off time ———————————————
Press SLEEP once.
The remaining time until the shut-off time appears in minutes.
• To change the shut-off time, press SLEEP repeatedly.
To cancel the Sleep Timer ———————————
Press SLEEP repeatedly until "SLEEP OFF" appears on the display
window.
• Turning off the power also cancels the Sleep Timer.
20
All manuals and user guides at all-guides.com
Secondary remote control
SLEEP
Using the DSP Modes
The built-in Surround Processor provides two types of the DSP
(Digital Signal Processor) mode — Surround mode and DAP
(Digital Acoustic Processor) mode.
Surround modes ———————————————
With this system, you can use two types of the Surround mode.
Dolby Surround (Dolby Digital and Dolby Pro Logic)*
Used to watch the soundtracks of software encoded with Dolby
Digital (bearing the mark
(bearing the mark
).
Dolby Digital and Dolby Pro Logic can be selected automatically
according to software played back.
DTS Digital Surround**
DTS Digital Surround is a discrete 5.1 channel digital audio format
available on CD and DVD software.
To watch the soundtracks of video software bearing the mark
the system can provide you with DTS Digital Surround decoder.
DTS Digital Surround is automatically selected according to
software played back.
Note:
• Change the decode mode from "AUTO/PCM" to "DTS" before
playing an audio CD recorded with DTS Digital Surround..
*
Manufactured under license from Dolby Laboratories. "Dolby", "Pro
Logic", and the double-D symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. c1992-1998 Dolby Laboratories, Inc.
All rights reserved.
** Manufactured under license from Digital Theater Systems, Inc. US Pat.
No. 5,451,942 and other world-wide patents issues and pending. "DTS"
and "DTS Digital Surround" are trademarks of Digital Theater Systems,
Inc. c1996 Digital Theater Systems, Inc. All rights reserved.
DAP modes —————————————————
The sound heard in a concert hall or club consists of direct sound
and indirect sound — early reflections and reflections from behind.
Direct sounds reach the listener directly without any reflection. On
the other hand, indirect sounds are delayed by the distances of the
ceiling and walls. These direct sounds and indirect sounds are the
most important elements of the acoustic surround effects. The DAP
mode can create these important elements, and gives you a real
"being there" feeling.
) or with Dolby Surround
,
Publicité
