Dometic 10 Serie Instructions De Montage page 11

RCD10.5
You find the instructions for changing the decorative plate and the door hinge online at:
documents.dometic.com/?object_id=81907
4.1 Choosing an installation location
A
NOTICE! Damage hazard
• The refrigerator may not be installed in the rear of mobile homes with the door
pointing in the direction of travel.
• Leave the device in a vertical position for at least 3 hours before starting up for the
first time.
When installing the refrigerator, note the following:
• Ensure that the floor is solid and level.
Park the vehicle horizontally for this purpose.
• The refrigerator must be installed so that:
– is easily accessible for service work
– is easy to uninstall and install
– can be easily removed from the vehicle
• In campervans an undercounter unit can be installed with the door pointing in the direction of travel, as long as
it is installed next to the sliding door and behind the co-driver's seat.
• The refrigerator must be installed in a recess so that it stands secure when the vehicle is in motion. Note the
dimensions in fig. 1, page 3 and fig. 3, page 4 for this purpose.
Note the following recess dimension (fig. 2, page 4):
Refrigerator height (A)
Refrigerator width (B)
Refrigerator depth (C)
(excludes control knob 5 mm)
Recess height (H)
Recess width (W)
Recess depth (D)
• The refrigerator must be installed with a minimum distance of 5 mm from the floor to ensure that the door can
be opened properly (fig. 3, page 4).
– Make sure that no carpets interfere with the free movement of the door.
– Avoid placing the refrigerator directly on the floor.
EN
RCD 10.ES, RCD 10.5ET
1283 mm
523 mm
550 mm
1286 mm
528 mm
568 mm
Installing the refrigerator
RCD 10.XES, RCD 10.5XET
1283 mm
523 mm
605 mm
1286 mm
528 mm
623 mm
11