Dimplex BTHC 1000 Instructions De Montage Et D'utilisation page 12

English
1 Please read immediately
1.1 General information
Please read this manual carefully before installing the cylinder
and observe the safety notes in particular.
ATTENTION!
We do not assume any liability for damage resulting from
failure to observe this manual.
1.2 Intended use
The cylinder is only used for buffering water in closed heating
and refrigerant circuits. It may only be used for this purpose.
Any other use is classed as misuse and is prohibited.
The buffer tank must be used in combination with heat pumps
for heating or heating/cooling, use in other water heating sys-
tems or chillers is also possible.
Any other or further use is regarded as misuse. The user is solely
responsible for any resulting damage.
Intended use also includes observing the installation manual
and complying with the maintenance intervals.
NOTE
Buffer tanks are not enamelled and, for this reason, should
never be used for domestic water heating.
EN-2
Please pass this installation manual and all documents accom-
panying the cylinder to the system operator for storage.
The cylinder corresponds to the ErP directive 2009/125/EC
(environmentally-friendly design) and 2010/30/EU (energy ef-
ficiency) of the European Parliament.
The delegated regulation (EU) no. 814/2013 and the regulation
(EU) no. 812/2013 of the commission are also fulfilled.
452115.66.85 · FD 0301
BTHC 1000