Briggs & Stratton 130000 Manuel De L'utilisateur page 11

8
1. Press down and hold the auger control (A, Figure 8).
2. Press down and hold the traction control (B).
3. Release the auger control so the left hand is free to reach
other controls.
• If the auger stops, see an authorized dealer.
Note: Free Hand cannot be actuated by releasing the traction
control.
Clearing a Clogged Discharge Chute
DANGER
The discharge chute contains a rotating impeller to throw
snow. Fingers can quickly become caught in the impeller
resulting in traumatic amputation or severe laceration. Never
clear a clogged discharge chute with your hands. Always use
a clean-out tool.
To safely clear a clogged discharge chute, follow these
instructions:
1. Stop the engine and remove the key.
2. Ensure that the impeller has stopped rotating.
3. Use a clean-out tool (A, Figure 9) to remove snow from the
discharge chute. Never clear a clogged discharge chute
with your hands!
All manuals and user guides at all-guides.com
9
Using the Headlight
Some models are equipped with a headlight (L, Figure 5) to
help illuminate the area in front of the snowthrower. The
headlight is on whenever the engine is running. There is no
switch.
11