Replacing the oven light
Replacing the oven light
Replacing the oven light
Replacing the oven light
Replacing the oven light
Make sure that the equipment is not connected to the
electricity supply.
Unscrew the protective glass cap inside the oven,
unscrew the light bulb and replace it with another one
suited to high temperatures (300°C), which has the
same characteristics as follows:
-Voltage 230 V
-Power 15 W
-E 14 cap.
Cleaning the glass ceramic hob
Cleaning the glass ceramic hob
Cleaning the glass ceramic hob
Cleaning the glass ceramic hob
Cleaning the glass ceramic hob
Before cooking, the surface of the hob should be
cleaned using a damp cloth, to remove dust or resi-
due from foods cooked previously. The surface of the
hob should be cleaned regularly with a solution of warm
water and non-abrasive detergent. It will occasionally
be necessary to use special cleaning products for
glass ceramic hobs. First, remove all food residues
and traces of grease from the hob using a special
cleaning scraper, for example
supplied). Clean the hob when it is warm; use a suitable
cleaning product and absorbent kitchen paper, polish
with a damp cloth and dry. Aluminium foil, plastic
objects or synthetic materials which are accidentally
melted on the hob, even sugar or foods with a high
sugar content, should be removed from the hot cooking
zone immediately
immediately, using a scraper. Special cleaning
immediately
immediately
immediately
products form a transparent protective layer which
repels dirt. This also protects the surface from potential
damage caused by foods with a high sugar content.
Never use abrasive products or sponges; even ag-
gressive chemical detergents such as oven sprays or
stain removal products should be avoided.
GB
(not
23