Timer (Electric Oven) - SCHOLTES CP 965 R Mode D'emploi

Masquer les pouces Voir aussi pour CP 965 R:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TIMER (ELECTRIC OVEN)

This feature allows you to program the oven or the grill as
follows:
• Delayed cooking start time with a specified duration;
• Immediate start with a specified duration;
• Timer.
Button functions:
:
timer with hours and minutes;
:
cooking time;
:
cooking end time;
:
manual change;
-:
set cooking time (countdown);
+:
set cooking time (counting upwards from zero).
H o w t o r e s e t t h e d i g i t a l c l o c k
H o w t o r e s e t t h e d i g i t a l c l o c k
H o w t o r e s e t t h e d i g i t a l c l o c k
H o w t o r e s e t t h e d i g i t a l c l o c k
H o w t o r e s e t t h e d i g i t a l c l o c k
After the appliance has been connected to the power supply,
or after a power cut, the clock display will begin to blink,
showing the figure: 0.00
0.00
0.00
0.00
0.00
• Press the
and
buttons simultaneously, then
set the exact time (within 4 seconds) using the - - - - - and
+ + + + + buttons.
The button + + + + + brings the time value forward.
The button - - - - - brings the time value back.
The time can also be changed in the following two ways:
1. Repeat all of the steps above.
2. Press the
button, then use the - - - - - and + + + + + buttons to
update the time.
Operating the oven manually
Operating the oven manually
Operating the oven manually
Operating the oven manually
Operating the oven manually
Once the time has been set, the programmer automatically
switches to manual mode.
Note:
Note: Press the
Note:
button to restore the manual mode
Note:
Note:
after every "Automatic" cooking session.
D e l a y e d c o o k i n g s t a r t t i m e w i t h a s p e c i f i e d
D e l a y e d c o o k i n g s t a r t t i m e w i t h a s p e c i f i e d
D e l a y e d c o o k i n g s t a r t t i m e w i t h a s p e c i f i e d
D e l a y e d c o o k i n g s t a r t t i m e w i t h a s p e c i f i e d
D e l a y e d c o o k i n g s t a r t t i m e w i t h a s p e c i f i e d
d u r a t i o n
d u r a t i o n
d u r a t i o n
d u r a t i o n
d u r a t i o n
The total cooking duration and the time at which the cooking
will finish must be set. If we suppose that the time display
reads 10:00:
1. Turn the oven control knob to the desired setting and
temperature (example: static oven mode at 200°C).
2. Press the
button, then set the desired cooking
duration (within four seconds) using the - - - - - and + + + + +
buttons. Supposing the cooking duration is set at 30
minutes, the display will read as follows:
Release the button, and within 4 seconds, the current time
will reappear with the
symbol, along with the word "auto"
button, then use the - - - - - and + + + + + buttons
3. Press the
to set the desired cooking end time. Let us suppose
this time is 1:00 p.m.
4. After the button has been released, the current time
will be displayed after approximately 4 seconds:
When the text "auto"
cooking duration and the time it is due to finish have been
programmed in automatic mode. At this point, the oven will
switch on automatically at 12:30 and switch off after 30
minutes. When the oven is switched on, the symbol
be displayed for the entire cooking duration. The cooking
duration can be displayed at any time by pressing the
button, and the time it is due to finish may be displayed by
pressing the
Once cooking is complete, a buzzer will sound; to turn it off,
simply press any button except the - - - - - and + + + + + buttons.
I m m e d i a t e
I m m e d i a t e
I m m e d i a t e
I m m e d i a t e
I m m e d i a t e
By programming just the duration (points 1 and 2 of the
"Delayed cooking start time with a specified duration"
section), cooking will begin immediately.
To cancel a cooking schedule which has already
To cancel a cooking schedule which has already
To cancel a cooking schedule which has already
To cancel a cooking schedule which has already
To cancel a cooking schedule which has already
been programmed
been programmed
been programmed
been programmed
been programmed
Press the
button and use the - - - - - button to reset the time
to
then press the manual cooking mode button
Timer feature
Timer feature
Timer feature
Timer feature
Timer feature
The timer feature allows you to enter a specific amount of
time and counts down from this time to zero. This feature
does not switch the oven on or off; it merely sounds a buzzer
when the set time has elapsed.
When the
button is pressed, the following appears:
Then use the – – – – – and + + + + + buttons to set the desired time.
As soon as the button has been released, the timer will start
to count down and the current time will be displayed.
After the time has elapsed, an audible signal will be emitted;
this can be switched off by pressing any button (except the
– – – – – and + + + + + buttons). At this point the symbol
switch off.
C o r r e c t i n g / d e l e t i n g
C o r r e c t i n g / d e l e t i n g
C o r r e c t i n g / d e l e t i n g
C o r r e c t i n g / d e l e t i n g
C o r r e c t i n g / d e l e t i n g
• The data entered can be changed at any time by
pressing the corresponding button and the – – – – – or + + + + +
buttons.
• When the data for the cooking duration is deleted, the
"auto"
"auto"
"auto"
"auto"
data for the cooking end time is also deleted
automatically, and vice versa.
• If the oven has already been programmed, it will not
accept cooking end times which are before the start of
the programmed cooking process.
"auto"
"auto"
"auto" appears, this indicates that the
"auto"
button.
s t a r t
s t a r t
s t a r t
s t a r t
s t a r t
w i t h
w i t h
w i t h
w i t h
w i t h
a
a
a
a
a
s p e c i f i e d
s p e c i f i e d
s p e c i f i e d
s p e c i f i e d
s p e c i f i e d
d a t a
d a t a
d a t a
d a t a
d a t a
GB
will
d u r a t i o n
d u r a t i o n
d u r a t i o n
d u r a t i o n
d u r a t i o n
.
will also
21

Publicité

Chapitres

Table des Matières
loading

Table des Matières