Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Installation
Installation
The dome camera is for use in surface or pendent mounting applications, and the mount-
ing member must be capable of supporting loads of up to 4.5 kg. (Pendent mounting
must use pendent mount accessory.)
The dome cameras mounting bracket should be attached to a structural object, such as
hard wood, wall stud or ceiling rafter that supports the weight of the dome camera.
CAUTION: A silicone rubber sealant must be applied to seal the housing to secure
water-proofing.
CAUTION: Please reset the camera after 30 ~ 60 minutes when installing it in situations
colder than -10°C.
6
Plastic Anchors (4x)
Mounting Bracket (1x)
Mounting Screws (4x)
Safety Lanyard (1x)
Dome Bracket (1x)
Publicité
