Cassese CS1 CART Manuel D'utilisation Et De Pièces page 16

To access more easily to the mechanical parts, you have to remove the side panel where
is located the sticker "Cassese France". The following procedure is to be followed for
removing or replacing the side panel of the machine :
Unscrew the 4 screws of
the working table with
the Allen Key 3mm.
Now, you can access to
the mechanical parts of
the machine.
G) REMOVING THE WORKING TABLE WITH THE PEDAL
After the previous step,
rotate the pedal in its
axis and put it in vertical
position.
Non contractual document - Cassese France
All manuals and user guides at all-guides.com
F) REMOVING THE SIDE PANEL
Next, shift to one side
the working table.
You can remove the
pedal of its axis by
pulling up.
13
Take the side panel and
remove it by pulling up.
Inside view of the CS1
CART.
Take the working table
and the pedal together to
exit the mechanical parts
from the frame.
- Document non contractuel
®