Publicité
Les langues disponibles
Les langues disponibles
E) UNJAMMING OF THE WEDGE DISTRIBUTOR BLOCK
If the wedge driver blade or a wedge is jamming your wedge distributor block, please
follow this procedure :
-Remove the cartridge located inside the underpinner, and the magnetic adjustable rod
clamp assembly.
-If the cartridge doesn't come out, loosen the screw of the wedge distributor block with a
2.5mm Allen key, unlock the handle for loading wedges 3 and remove the sliding table E.
-Pull up the wedge distributor block. If the cartridge was jammed inside, ask for the help
of someone to turn the handle for loading wedges 3. Then pull up the wedge distribution
block and the cartridge.
-If the wedge distributor block doesn't come out, perform a quick hard compression on
the crossbar as in the picture.
-Try to pull up the wedge distribution block. If it still doesn't come out, then call your
distributor for further instructions.
If you have succeeded in removing the wedge distributor block :
-If the old wedge driver blade is stuck in the wedge distributor block :
PERFORM THE PROCEDURE B STEP 1 TO STEP 5,
THEN PROCEED TO PROCEDURE E COMPLETELY.
-If the old wedge driver blade is damaged and remains in the machine :
PERFORM THE PROCEDURE B STEP 1 TO STEP 5,
THEN PROCEED TO PROCEDURE C + D COMPLETELY.
Non contractual document - Cassese France
All manuals and user guides at all-guides.com
12
- Document non contractuel
®
Publicité
