Cassese CS1 CART Manuel D'utilisation Et De Pièces page 13

C) REMOVAL OF THE WEDGE DRIVER BLADE
It is possible that you have to change the wedge driver blade.
Please follow the previous procedures A steps 1 to 5 and follow this procedure
with the wedge distributor block outside of the machine.
Remove the cartridge of wedges and the magnetic adjustable rod clamp
assembly.
1.
3.
Rotate the piece as on the picture.
TO SLIDE THE WEDGE DRIVER BLADE UP WITH THE PEDAL
1 step
st
Push the pedal and maintain it.
Non contractual document - Cassese France
All manuals and user guides at all-guides.com
2.
First, you have to
take this piece with
all the elements on
the picture.
4.
Now, the wedge driver blade is pulled
up so you can remove it from its place.
10
Put the piece next to the axis of the
crossbar in this position.
Now, the piece is in its place in order
to help to slide the wedge driver blade
up.
2 step
nd
- Document non contractuel
®