Publicité
Les langues disponibles
Les langues disponibles
Connecting and changing the gas cylinder
•
Carry out the changing of the gas cylinder away from any source of ignition.
Position the gas bottle on the left side of your gas grill, it should not be placed
inside the grill. Note that the gas cylinder must be protected from heat and
kept in a safe position.
•
When your gas grill is ready to use, insert the regulator into the gas cylinder
valve and tighten securely.
WARNING
Risk of injury and damage to property! Before attempting to light
your gas grill, read and understand all instructions, warnings, and
safety precautions outlined in this owner's manual.
•
Check the hose for cracks, cuts or abrasions before each use. If the hose is
damaged in any way, do not use your gas grill.
•
When changing the gas bottle, make sure that there are no sources of ignition
nearby, e. g. fi re, cigarettes, open fl ames, etc. Make sure the device is turned
off .
•
The device may only be used with the gas cylinders specifi ed in the product
data sheet. The gas bottles used must comply with national regulations.
EN
29
Publicité
