Niko 550-00002 Mode D'emploi page 42

6 Affix the name plate with the double-sided adhesive tape provided.
7 On the side of the electrical cabinet, attach an RJ45 connector to the cable according to the T568B standard. Connect
the RJ45 connector to the output of the Power over Ethernet power supply. The PoE power supply acts as the power
supply for the external video unit.
8 Use a patch cable RJ45-RJ45 to connect the PoE power supply with the RJ45 port 1,2 or 3 of the connected
controller (possibly with an extra switch).
For the connection of the touchscreen 2, see
As soon as you have completed the installation, switch on the power to program the settings of the external video
unit. After approximately 1 minute, you will hear a brief signal tone at the external video unit.
42
External video unit
All manuals and user guides at all-guides.com
Touchscreen 2 op pagina 43.