Installation Instructions - vitapur Pro Soft VWS296GR Guide D'installation, Utilisation Et D'entretien

The clips connecting the bypass assembly to the valve are inserted in the downward direction when the
6.
inlet and outlet ports are facing downwards. The locking clips are inserted in the upwards direction from
the bottom when the inlet and outlet ports are upwards.
b a
ypass ssembly wiTh inleT and ouTleT
porTs faCing upwards
Fig. N
Locking Clips
7.
Please check that the flow
meter cable is connected on
the valve outlet port.
When the bypass assembly is in service mode the soft water is delivered to the building. During
8.
regeneration cycle hard water is delivered to the water softener while also providing hard water to the
building distribution system.
i
nsTallaTion
Assembling the Water Softener:
CAUTION: When maneuvering
the resin tank into the cabinet
do not attempt to lift the resin
tank by the top cover.
Rotate the valve and resin tank on the
ground to maneuver it into place for
the installation.
)
i
nsTruCTions
b a
ypass ssembly wiTh inleT and ouTleT
porTs faCing downwards
Fig. O
6
)
Locking Clips