Tascam CD-A700 Manuel Du Propriétaire page 9

RANDOM Playback
1. Press the SHUFFLE button in the Stop
mode.
The SHUFFLE indicator lights in the
display.
2. Press the CD PLAY (∏) button.
Tracks will be randomly selected and
played back.
O Press the Æ button with the random
play function engaged to select a track
at random. Press the Ú button to
replay the currently played track from
its beginning.
O A track cannot be replayed after it has
been played in this mode.
O To release the random play function
while it is engaged, press the SHUFFLE
button again. Tracks will play back in
their normal designated order, starting
from the currently played track.
Pitch Control
You can change the playback speed,
allowing the pitch of the reproduced sound
to be altered.
The PITCH CONTROL button is operational
only in the stop mode. When the PITCH
CONTROL button is pressed, the PITCH
CONTROL indicator lights. By turning the
PITCH CONTROL knob to the right, the
playback speed becomes faster, resulting
in a higher pitch. By turning it to the left,
the playback speed becomes slower,
resulting in a lower pitch.
O At the fully clockwise position, the
playback speed is approx. 12 % faster.
O At the fully counterclockwise position,
the playback speed is approx. 12 %
slower.
Repeat Function
The repeat function allows
playback of any single track, the entire
disc, or any desired portion on the disc
designated by two (start and end) points.
O The repeat functions can be released
by pressing the repeat button again.
∑ To repeat one track
(Single Repeat mode)
1. Press the REPEAT 1/ALL button.
The REPEAT and SINGLE indicators
light.
2. Select the required track by pressing
the Ú/Æ button.
The selected track is played, then when
the end of the track is reached, the
player will return to the beginning of the
track and playback starts again. In this
way, the selected track will be played
back repeatedly.
∑ To repeat an entire disc
(All Repeat mode)
1. Press the REPEAT 1/ALL button twice.
The REPEAT and ALL indicators light.
2. Press the CD PLAY (∏) button.
Playback starts and, when the end of
the disc is reached, the player will
return to the beginning of the first track,
and then playback
repeatedly.
_ 9 _
∑ To repeat a designated section
(A-B Repeat mode)
repeat
1. Start playback from any point before
the section to be designated.
2. Designate the point at which repeat
playback should start (point A) by
pressing the A-B button.
The REPEAT and A - indicators light and
the B indicator blinks to show that point
A has been entered.
3. When the portion at which repeat
playback should end is reached, press
the A-B button again to designate point
B.
The B indicator is changed to light
steadily to show that the A-B repeat
function has been activated.
The player automatically returns to
point A and restarts playback.
When play reaches point B, the player
returns to point A and starts playback
again, repeatedly.
O After designating point A, when quick
searching point B, use the Ò or Æ
button instead of playing back normally.
O When the A-B button is pressed again
during block repeat play, block repeat
playback will be released.
∑ Programmed repeat playback
The repeat function can be activated even
in the Programmed Playback mode.
continues
To repeat all the programmed tracks, press
the REPEAT 1/ALL button twice. (At this
time, check that the REPEAT and ALL
indicators light.)