ETNA ECM143RVS Notice D'utilisation page 23

Multistage cooking
You can set a maximum of 3 cooking stages.
Set the defrost function (if applicable) as the
first stage. A beep sounds after the end of
each stage and the next stage will start.
The Auto-menu cannot be used with this
mode.
example
You want to cook for 10 minutes at a
microwave power level of 100% and 5 minutes
at a microwave power level of 80%.
1 Press the 'Microwave' button once for a
microwave power level of 100%.
2 Press 1 or 5 . Set the cooking time to 10
minutes.
3 Press the 'Microwave' button twice for a
microwave power level of 80%.
4 Press 1 or 5 . Set the cooking time to 5
minutes.
5 Press the 'Start/OK' button to start the set
programme.
2/4
1/3
Pre-set function
first set the clock (see the chapter entitled
"Setting the clock")
1 Set a cooking function. A maximum of
3 functions can be set (apart from the
defrost function). When using the "Auto
menu", only one function can be set.
2 Press the 'Clock/Pre-Set' button. The
current time is shown in the display. The
hours flash.
3 Press 1 or 5 . Set the desired hours.
4 Press the 'Clock/Pre-Set' button. The
5
minutes flash.
5 Press 1 or 5 . Set the desired minutes.
6 Press the 'Start/OK' button to start the set
programme. When the set time arrives two
beeps will sound and the cooking
programme will start.
2/4
3/5
6