CASO DESIGN MG25 MENU Mode D'emploi Original page 53

12.4 Opening / closing door

Push the door opener to open the door of the device. If the device is switched
on, the current cooking programme will be interrupted.
► Leave the door open for a moment before reaching into the cooking chamber, to allow the
accumulated heat to escape.

Close the door until the door latch audibly locks in place. If a current cooking
programme was interrupted as a result of opening the door, the current cooking
programme will be continued after pressing the button Start/Quickstart.
12.5 Switch on/off sound
Press the button power/sound for three seconds in order to switch on or off
the sound (beep tone).
You can hear messages of the programme ending and warning signals even if
the sound has been switched off.
12.6 Activation after selecting the programme
After selecting the program, press the button Start/Quickstart to start the
preset cooking programme.
12.7 Quick start
Utilise this function to programme the oven for comfortable cooking at 100%
microwave performance.
Press the Start/Quickstart button in quick sequence to set the cooking time.
The oven starts automatically after 2 seconds.
Once the end of the cooking time is reached, four signal tones will be emitted and END will
appear in the display.
12.8 De-activation:
In order to interrupt an ongoing cooking programme, you can proceed as
follows:
Press the Stop button once. The cooking programme that is in use will be
stopped.
Open the door of the device. The cooking programme that is in use will be
stopped.
caso MG25 Menu
Open door
Please note
Close doors
53