Receiving Faxes - Canon K10297 Guide D'utilisation

Receiving Faxes

Different ways to receive a document
Your fax provides you with several modes for receiving documents. To determine which mode best
suits your requirements, see the table below.
FAX/TEL MODE/NET SWITCH*
INCOMING CALL ...
MANUAL MODE
INCOMING CALL ...
ANS.MACHINE MODE
INCOMING CALL ...
FAX ONLY MODE
INCOMING CALL ...
* This setting is only available for some countries.
28 Receiving Faxes
RECEIVE
INCOMING CALL ...
RECEIVE
FAX
LINE IN USE
RECEIVE
Automatically switches between fax
and voice calls. Receives documents
automatically and rings for voice calls
(see page 29).
Net Switch:
If your telephone service allows you to
have one telephone line with two
numbers: one for fax and one for
telephone, use this mode. Subscribe to
the Telstra FaxStream™ Duet service
(Australia) or the Telecom FaxAbility
service (New Zealand) (see page 31).
Rings for every call, regardless of
whether the call is a fax call or a voice
call. For a fax call, you have to
manually activate reception of the fax
(see page 30).
Receives documents automatically
and routes voice calls to the answering
machine. Connect an answering
machine to your fax (see page 30).
For the FAX-JX500/JX300 models,
cancel TAM MODE.
Answers all calls as fax calls. Receives
documents automatically and
disconnects voice calls. Separate
telephone line for fax use only. If you
want to be alerted when a fax call is
received, enable the <INCOMING
RING> setting (see page 51).