Routine Maintenance - Canon K10297 Guide D'utilisation

Routine Maintenance

Maintenance Menus
The table below shows the available maintenance menus when you press [Maintenance].
Menus
CS CLEANING (see page 63)
NOZZLE CHECK (see page 59)
CLEANING (see page 60)
DEEP CLEANING (see page 60)
ALIGN PRINT HEAD (see page 61)
HEAD ALIGN VALUE (see page 61)
ROLLER CLEANING (see page 64)
BOTTOM CLEANING (see page 64)
Replacing a FINE Cartridge
If there is no improvement with the quality of printing following such maintenance as FINE Cartridge
Cleaning, the FINE Cartridge is probably empty. Replace the empty FINE Cartridge with a new one.
When replacing a FINE Cartridge, check the model number very carefully.
The machine will not print properly if the wrong FINE Cartridge is used, or installed incorrectly.
PG-40 Black
Knowing When to Replace a FINE Cartridge
When Ink is Low
When the ink level is low, <RECOMEND NEW CRT> is displayed on the LCD and the Ink Lamp
lights up. In this state the FAX will receive documents to memory (up to 30 transactions or 120
pages (FAX-JX200/JX201: 60 pages) to prevent the information contained in the FAX from being
lost if the ink runs out completely. You need to print out received faxes manually from the
<MEMORY REFERENCE> menu.
After printing, delete unnecessary faxes from the memory. For more details, see "Documents
Stored in Memory" on page 36.
When Ink is Empty
When the ink is almost empty, <RECOMEND NEW CRT> is displayed on the LCD and the Ink
Lamp blinks. When this occurs it may not be possible to clearly print received faxes from
memory. When the ink is empty, <NO INK> is displayed on the LCD. Replace the FINE Cartridge
with new one. For more details, see "Replacing a FINE Cartridge" on page 58.
Printing will resume as soon as the FINE Cartridge is replaced.
56 Routine Maintenance
PG-50 Black