Receiving Faxes - Canon JX510P Guide D'utilisation

Receiving Faxes

Different ways to receive a document
Your fax provides you with several modes for receiving documents. To determine which mode best
suits your requirements, see the table below.
<Fax/Tel Mode>/<DRPD>*
INCOMING CALL ...
<MANUAL MODE>
INCOMING CALL ...
<ANS.MACHINE MODE>
INCOMING CALL ...
<FAX ONLY MODE>
INCOMING CALL ...
* This setting is only available for some countries.
32 Receiving Faxes
RECEIVE
INCOMING CALL ...
Pick up the Handset to answer
the call. You can not answer
with your external device.
RECEIVE
FAX
LINE IN USE
RECEIVE
Automatically switches between fax
and voice calls. Receives documents
automatically and rings for voice calls
(see page 33).
<DRPD>:
The fax rings differently depending on
whether a call is a fax or voice call.
Subscribe to a DRPD service. Handset
or extension phone connected to the
fax (see page 35).
Rings for every call, regardless of
whether the call is a fax call or a voice
call. For a fax call, you have to
manually activate reception of the fax
(see page 34).
Receives documents automatically
and routes voice calls to the answering
machine. Connect an answering
machine to your fax (see page 34).
For the JX510P model, cancel TAM
mode.
Answers all calls as fax calls. Receives
documents automatically and
disconnects voice calls. Separate
telephone line for fax use only. If you
want to be alerted when a fax call is
received, enable the <INCOMING
RING> setting (see page 57).