Canon K10297 Guide D'utilisation page 61

Press [Stop] to cancel the current print job.
When printing is finished, replace the FINE Cartridge immediately. If you continue printing with
an empty FINE Cartridge, it will be a cause of trouble.
Note
If you continue printing when the ink level for the FINE Cartridge is low, the FAX may not print
out properly.
When the ink level is low, the print quality may become poor, and the machine will start storing
incoming fax data in the memory.
The FAX cannot detect whether or not the received data are clearly printed on the paper.
The FAX automatically deletes the received fax data in the memory after printing them. We
recommend you to set <SAVE RX IMAGE> to <ON> (see page 51). You can store the received fax
data in the memory for no more than 30 transactions. Delete them before the memory becomes full.
Setting Automatic Printing
When the ink is low, you can set the receiving fax either automatic printing or storing in memory.
1
Press [Menu].
2
Use [ ] or [ ] to select <DATA REGSTRATION>, then press [Start]. The LCD
displays <USER SETTINGS>.
3
Use [ ] or [ ] to select <RX SETTINGS>, then press [Start]. The LCD displays
<ECM RX>.
4
Use [ ] or [ ] to select <OPTION SETTINGS>, then press [Start]. The LCD
displays <OFF>.
To disable ink low automatic printing, use [ ] or [ ] to select <OFF>, then press [Start].
Press [Stop] to return to standby mode.
To enable automatic printing, use [ ] or [ ] to select <ON> and continue with the steps
below.
5
Press [Start].
6
Press [Stop].
The fax returns to standby mode.
What is a Low Ink Warning?
The machine counts the amount of ink used and when the remaining level reaches a preset level
the Low Ink Warning lamp beside the LCD display lights up to advise you that the FINE Cartridge
is running out of ink.
When the <RECOMEND NEW CRT>, or <NO INK> message appears on the LCD.
RECOMEND NEW CRT
The ink level of the FINE Cartridge showing <RECOMEND NEW CRT> is low. The ink level
of the FINE Cartridge showing <NO INK> is empty. You should ensure you have a new FINE
Cartridge.
When the <INK VOL UNKNOWN> appears on the LCD.
INK VOL UNKNOWN
NO INK
Routine Maintenance 57