Publicité
Les langues disponibles
Les langues disponibles
8. TROUBLE SHOOTING
You can solve many common air conditioner problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
Appliance doesn't work
Cooling function (« COOL » mode) of the
appliance is not efficient
Appliance seems to make too much noise
« P1 » error code
NOTE: all pictures in the manual are for explanation only. The actual shape of the device you purchased
may be slightly different, but the operations and functions are the same.
PROBLEM
POSSIBLE CAUSE
Not plugged in
The appliance is turned off
The circuit breaker tripped or a blown fuse
(« TIMER »
Timer
corrected set
Water full alarm is on
Check if nothing is blocking air inlet/outlet
Make sure that there is no heat source in the
room
Strainers are too dirty and covered by dust
Set temperature is not appropriate
Fan speed set in not the correct one
Make sure that you have correctly removed
all packing material
Make sure that the air conditioner is stable
and level
Make sure that the surface on which your
appliance is perfectly flat
The air conditioner is in water full
mode)
hasn't
been
57
Publicité
