Télécharger Imprimer la page

Climadiff CLIMA10K1 Manuel D'utilisation page 51

Masquer les pouces Voir aussi pour CLIMA10K1:

Publicité

Les langues disponibles

Les langues disponibles

Note: Heating "HEAT" mode is only available for reversible devices.
4.
SWING Button (on some models)
Used to stop or start the louver movement or adjust the direction of the airflow up or down.
5.
ION Button (Optional)
By activating this button, the ion generator will energize and help remove pollen and impurities from the air.
6.
FOLLOW ME Button (Optional)
Refer to FOLLOW ME mode
7.
RESET Button
Once you have pressed the RESET button, all active settings will be canceled and the remote will retrieve
the initial settings.
8.
ON/OFF Button
The remote control works when this button is pressed, and stops when this button is pressed
again.
9.
FAN SPEED Button (on some models)
It is used to select the fan speed in four steps (Auto / Low / Medium / High):
10. TIMER ON Button
Press this button to start the automatic setting of the start time. Each press will increase the time setting from 30
minutes to 10 hours, then increase from 1 hour to 24 hours.
To cancel, press the button until 0.0 is displayed.
You can combine the TIMER ON button with the TIMER OFF button, for example you can program the turnoff of
the device in 2 hours and program the start of this one in 10 hours. Between the periods of 2h to 10h, the device
will be off.
51

Publicité

loading

Ce manuel est également adapté pour:

Clima12kr1