Climadiff CLIMA10K1 Manuel D'utilisation page 48

NOTE: This feature is unavailable under FAN or DRY mode.

Follow me/Temp sensing (optional)
 NOTE: This feature can be activated from the remote control ONLY. The remote control serves
as a remote thermostat allowing for the precise temperature control at its location. To activate
the Follow Me/Temp Sensing feature, point the remote control towards the unit and press the
Follow Me/Temp Sensing button. The remote control will send this signal to the air conditioner
until press the Follow Me/Temp Sensing button again.
If the unit does not receive the Follow Me/Temp Sensing signal during any 7 minutes interval,

the unit will exit the Follow Me/Temp Sensing mode.
NOTE: This feature is unavailable under FAN or DRY mode.

Auto-restart (optional)

If the unit breaks off unexpectedly due to the power cut, it will restart with the previous
function setting automatically when the power resumes.
Air flow direction adjustment
Adjust the air flow direction manually:

The louver can be set to the desired position manually.

Do not place any heavy objects or other loads on the louver, doing so will cause damage to
the unit.

Ensure the louver is fully opened under heating operation.

Keep the louver fully opened during operation.
48