Sensopart FT 80 RLA Instructions De Service Et De Montage page 81

Mounting and
operating instructions
12 Order information
Part no. Part name
574-41020 FT 80 RLA-500-L8
574-41024 FT 80 RLA-500-S1L8
1
* each include mounting and operating instructions FT 80 RLA (part no. 068-13715)
12.1 Accessories
Part no. Part name
902-51646 L8FS-5m-G-PUR
902-51671 L8FS-2m-G-PUR
902-51687 L8FS-2m-W-PUR
902-51688 L8FS-5m-W-PUR
579-50000 MS F 50
820-41002 MS F 88-2
533-11013 PC-SW ProgSensor
533-01005 CUSB-RS485-Set
533-11017 K2-ADE-TB
901-05097 CUSB-RS232-2m
Accessories not included in delivery
INFORMATION
To operate the FT 80 RLA-S1 sensor on a PC, the PC must be equipped with a RS485 interface. If
this is not the case the existing interface (RS232, USB, etc.) can be used with a adaptor.
If your PC has a RS232 interface, we recommend to use the RS232 converter K2-ADE-TB *
If your PC has a USB interface, the additional CUSB-RS485-Set *
2
* see accessory list for part numbers
INFORMATION
Data sheets, instruction manuals and operating software (Progsensor) are available for down-
load on www.sensopart.com.
FT 80 RLA Disctance sensor - GB - 068-13715 - 01.09.2014-05
Description
Distance sensor, 250 ... 750 mm, resolution 0.1 % of measuring range,
2 x PNP, N.O. / N.C., 4 ... 20 mA, M12 8-pin connector, *
Distance sensor, 250 ... 750 mm, resolution 0.1 % of measuring range,
2 x PNP, N.O. / N.C., 4 ... 20 mA, RS485, M12 8-pin connector, *
Description
Connection cable M12, 8-pin, length 5 m, straight, PUR
Connection cable M12, 8-pin, length 2 m, straight, PUR
Connection cable M12, 8-pin, length 2 m, angled, PUR
Connection cable M12, 8-pin, length 5 m, angled, PUR
Mounting bracket F 50 (stainless steel VA)
Mounting bracket F 88-2 (metal)
Software
USB-RS485 interface converter, set incl. extension cable 0.7 m, CD-ROM
(driver-software) and D-SUB-socket CI D9F-S9 (9-pin, female) with screw
terminal
Interface Converter RS485/422 zu RS232
Interface Ccable incl. CD-ROM USB-RS232
1
is required.
2
1
2
81