Sensopart FT 80 RLA Instructions De Service Et De Montage page 46

Dimensions of light spot
59.5
20.5
12.5
Illustr. 4
15500157
5 Mounting
5.1 Dimensional drawing
5.2 Mounting the sensor
Sensor alignment
Position sensor and screw to suitable holder, e.g. Typ MS F 50 (illustr. 6a)* or Typ MS F 88-2 (illustr. 6b)* (not inclu-
ded in standard delivery), via fixing holes.
*Part number: see list of accessories
INFORMATION
Observe the following operating conditions:
• The distance to the object must be within the sensor's operating range (see technical data).
• The direction of movement of the object should be cross-wise to the sensor's front screen
(illustr. 7+8).
• With strongly reflective or shiny surfaces, incline the sensor by approx. 5 ° in relation to the
surface of the object (illustr. 9).
46
A
B
C
D
FT 80 RLA-500
A
B
C
D
All dimensions in mm (typical values)
lllustr. 5
15300347
FT 80 RLA Disctance sensor - GB - 068-13715 - 01.09.2014-05
operating instructions
250
750
1,9 x 1,2
2,7 x 1,9
19 M4 (4x)
19.1
3.2
ø
27.6
4
19
32
36
Mounting and
lllustr. 6a
15300065
lllustr. 6b
15300562