Télécharger Imprimer la page

Trix Re 4/4II Serie Mode D'emploi page 5

Publicité

Function
This model is designed for operation with H0 2-rail DC sys-
tems (track according to NEM standards) with conventional
DC power packs.
This locomotive is equipped with an eight-pole electrical
connection for retrofitting it with a digital decoder complying
with NEM Standard 652.
Headlights with „Swiss headlight changeover".
The necessary maintenance that will comes due with normal
operation is described below. Please see your authorized Trix
dealer for repairs or spare parts.
All manuals and user guides at all-guides.com
Safety Information
No warranty or damage claims shall be accepted in those cases where
parts neither manufactured nor approved by Trix have been installed in
Trix products or where Trix products have been converted in such a way
that the non-Trix parts or the conversion were causal to the defects and /
or damage arising. The burden of presenting evidence and the burden of
proof thereof, that the installation of non-Trix parts or the conversion in or
of Trix products was not causal to the defects and / or damage arising, is
borne by the person and/or company responsible for the installation and /
or conversion, or by the customer.
WARNING! This product contains magnets. Swallowing more than one
magnet may cause death in certain circumstances. If necessary, see a
doctor immediately.
This locomotive is only to be used with the operating system
it is designed for.
This locomotive must not be supplied with power simultane-
ously by more than one power source.
Please make note of the safety information in the instructions
for your operating system.
The feeder track must be equipped to prevent interference
with radio and television reception, when the locomotive is
to be run in conventional operation. The 611 655 interference
suppression set is to be used for this purpose. The interfe-
rence suppression set is not suitable for digital operation.
5

Publicité

loading

Ce manuel est également adapté pour:

22148